In Germany there is no apprenticeship for lift engineers.
They are made inside a company – usually not yours.
Your own recruiting system for lift engineers, lift service technicians and the breakdown service – for companies maintaining their own and other makes in the field. Built inside your company, yours afterwards.
No obligation – no lock-in contract
The candidate market in this segment is narrowly cut, and the reason sits in the job title: in Germany, lift engineer is not a recognised apprenticeship. Whoever works in the shaft trained as a mechatronics technician, an industrial electrician or a plant mechanic and was brought to the equipment inside a company afterwards. There is now a course for lift technicians – but it runs in blocks at a training centre, so you release the man rather than have him learn alongside the job. And the people you need this year are already on a competitor's payroll. Usually a large manufacturer's, trained there, shaped there on a single make.
The business sits in the installed base. Units from several generations of control technology stand side by side, and modernising controller and drive has become a business of its own – measured against a set of rules of its own for the safety level of existing lifts. At the same time, operating a lift is more tightly regulated: an emergency call routed to a permanently staffed point, an emergency plan for each unit, recurring inspection by an approved inspection body alternating between full and intermediate inspection. Every one of these duties needs a person with tools in a van. The list of duties per unit has grown; the number of people able to work through it has not.
Precision beats reach, and speed beats both. An engineer who wants to move has several companies within reach who would take him at once; take a week to respond and you are negotiating against a signed acceptance. The bottleneck is almost never the channel, it sits between the application landing and the answer going out – with a service manager who is out on a route himself. That is the point we build first, and we build it so your own house runs it afterwards.
One application. Answered the same day.
A technician applies in the evening after their shift – and usually not only to you. Whoever answers first gets the interview. That is not a service promise, it is the selection mechanism of this market.
First application within 72 hours.
Then a fixed rhythm: every application answered the same day – even when the service manager is at a customer site or on holiday. The process and the templates belong to your company from day one.
- Answers in minutes, not days – evenings and weekends included
- Asks the points your service manager defined
- Mr Krüger
Good evening, I saw your field service technician role. How large is the travel radius?
- Blacklyne
Good evening! Around 180 km, you sleep at home. Overnight stays about twice a month, company vehicle provided. Which controls have you worked on most recently?
< 3 s - Mr Krüger
Siemens 840D and Heidenhain, seven years of CNC service. I am used to on-call duty.
- Blacklyne
That fits. Our service manager has Thursday 16:30 open – shall I book it for you?
< 4 s
Every route. One entry point.
Careers page, ad, message, callback – all in one place, on your access and with your data. No agency inbox you have to have candidates forwarded from.
- One entry point instead of five channels and three inboxes
- All applicant data stays with you – from day one
What keeps your roles open.
The bottlenecks in this segment – and why they rarely sit in the market.
You are not hiring, you are taking someone away
In Germany there is no training route producing finished lift engineers each year. The pool is therefore essentially your competitors' workforce, above all the service teams of the large manufacturers. A job ad reaches the wrong people here: the people who are not searching who, according to the EY job study, are open to moving without actively searching read no job board. They are in a van, on their route.
On-call and entrapment release decide the answer – and appear in no advert
The breakdown service runs around the clock, and the clock on an entrapment runs from the moment the call comes in to the moment someone reaches the lift – not from the moment the engineer sets off. A candidate wants to know before the first interview: how often is he on call, how large is the on-call area, how is it paid, who attends as the second person at night. If that is not in the advert, it gets negotiated late in the process. By then the other company has signed him.
Several generations of control technology in one portfolio
Someone coming from a large manufacturer knows one make, one diagnostic tool and one process. With you there is a relay controller on Tuesday and a third-party bus control on Wednesday for which no factory laptop exists. In the interview that is your strongest argument – technically more happens with you. In onboarding it is your biggest risk. It is almost never described, so it reads as an imposition rather than an offer.
The vacancy does not stand still, it spreads across the route
Maintenance visits, inspection attendance and callouts do not disappear when an engineer is missing. They land on the people who stayed, on top of their own on-call weeks. The second resignation then comes from your own team rather than the market – and costs you the same search again. Time to fill is not an administrative problem in this business, it is a risk to the maintenance portfolio.
6 percent are searching. a third would be open to an offer.
According to the EY job study 2025, a quarter of employees are actively looking and another third are open to an offer without searching. A job ad addresses the first 6 percent. The rest are reachable, just not where you advertise.
Every application is answered the same day.
Here is what changes for you.
What ends
-
Recruiter fee per head -
Open-ended retainer -
Staffing mark-up -
Accounts and applicant data with a provider
Outreach where the engineer already is
Regional access to the people open to a move who never open a job board – run on your own accounts and cut to the area your vans cover. Someone who spends the day in a shaft does not decide at a desk: the approach has to work on a phone, between two jobs, with no covering letter.
The role profile a lift engineer actually decides on
Area and route layout, on-call rota and pay, the makes in the portfolio, vehicle and equipment, the rules for working alone in the shaft, key and site responsibility, the share of modernisation against maintenance. These points appear in almost no advert, and they are exactly what every engineer thinks about first. With us they are in the opening line rather than late in the process.
First application within 72 hours
Not first screening, not first report: the first real application. Then a rhythm a service manager can hold even when he is out in a van himself – every application answered the same day, from the road via a stored template if need be. What is guaranteed is the placement, not the number of applications: if a committed role stays open, we keep working, at no further cost.
After the first hire you do not need us
Careers page, ad accounts, audiences, questionnaire, applicant data and everything documented in writing are yours afterwards. With a pool this size, the candidate base alone is worth the build: the engineer who does not move today is your first call next time – and then his contact sits with you, not with an agency.
4 steps.
Live from day one.
First we check whether the role can be filled in your region. Then it goes out – advert, application route and campaign from us, under your name. First applications within 72 hours.
-
Feasibility check
Can the role be filled in your region, and is your area still open? We put in writing what “the right fit” means technically. We decline roles that cannot be filled – even when that means one engagement less.
-
We launch it
Role profile with travel radius and on-call, careers page on your domain, a 90-second application path, campaign in your region. We build it and switch it live – you approve it once. Every account runs under your name.
-
Applications
Then a fixed rhythm: every application answered the same day, pre-screened on your service manager’s criteria. You run interviews instead of sorting. If a committed role stays open, we keep working – at no further cost.
-
It stays live
Accounts, audiences, templates and applicant data keep running under your name – live, not a kit to learn. The next role takes minutes: type the title, tick the box, live. If you would rather hand it back to us, you can – but you do not have to.
Honest answers.
-
01 Our engineers mostly work on other manufacturers' units. Is that a disadvantage in outreach?
The opposite. Someone coming out of a manufacturer's service arm who wants to see more than one make is reachable on exactly that point – provided it is in the advert and not first mentioned in the interview. For the build itself, what matters is not the nameplate but how often you look for an engineer over a year, and in which area. -
02 Should we really put the on-call duty in the advert?
Yes, with rota, area and pay. It costs applications and saves resignations in year one. Anyone who accepts an on-call duty that was kept quiet stops after the first few nights – and then you search a second time, in a market where word of that gets around. -
03 Where is the limit – what does the system not do?
It qualifies nobody. We describe the route into lift technology on your careers page so that a mechatronics technician or industrial electrician feels addressed; the course and the onboarding in the shaft are yours to carry. It also invents no people: if a role cannot be filled in your area, we say so beforehand and decline it. And retention after the hire is not part of it – we do not claim otherwise. -
04 Is there a price on the website?
No, deliberately. What the build costs depends on the number of roles and territories. We settle that in the first call against your numbers.
Articles for this industry
Practical guides and levers – straight from the field
One company per specialisation and area. Every slot is currently taken.
Put your name down. As soon as a slot opens in your area we will come back to you – with an assessment, not a pitch.
What happens next
- You leave a postcode and a website. That is all we need to place your catchment area.
- We come back as soon as we can – and we decline if your area is taken or the role cannot be filled. Honestly, before you lose time.
- If it fits, we run your area together: how many suitable technicians work within range, and what the build would cost you – including when we advise against it.